Description

The single mast is safe and reliable, and the integral lifting guardrail device has good strength. The height of the whole machine is greatly reduced during transportation. The loading and unloading is very convenient. The assembly or disassembly can be completed by one lift. Custom Push around vertical mast lift 21 ft.-25 ft worldwide.

Application Scenarios of Push around vertical mast lift 21 ft.-25 ft:
The single-mast hydraulic lift adopts the high-strength aviation aluminum alloy gold design, with a compact structure and a light body design. The hydraulic system and motor are imported from Europe and the United States, and the quality is guaranteed. The design is equipped with a backup power supply and a manual valve to ensure that the elevator can descend normally in the event of a power failure. The base of the fuselage is equipped with movable auxiliary wheels to provide good performance in turning, and the machine is equipped with a loading and unloading auxiliary device, which is light and convenient for loading and unloading.

It is mainly used in office building decoration, maintenance of large, medium and small shopping malls, internal cleaning and maintenance of hotels, maintenance of airport facilities, inside and outside high-speed railway stations, etc. The height of the equipment is mostly between 4 and 14 meters.

Push around vertical mast lift 21 ft.-25 ft pros and cons:
1. Light and convenient, easy to carry;

2. The overall size of the equipment is small, which can adapt to high-altitude operations in narrow areas;

3. Indoor aerial work can replace the boom type to a certain extent, and the cost performance is very high;

4. “Three no products”, no noise, no pollution, no exhaust emissions;

5. The working height is 14 meters, which is relatively limited.

Push around vertical mast lift 21 ft.-25 ft Summer Care：
1. Pay attention to disconnect all power supplies of the equipment after shutdown. Unplugged storage presents a potential safety hazard.

2. Fully charge the electric scissors or crank arm cart and store it.

3. Do a good job in the maintenance of the battery and the hydraulic system.

4. Regularly inspect the lifttruck according to the maintenance manual of China Construction Jincheng, and solve all possible problems in advance.

5. For the equipment that is shut down at the construction site, be prepared to shut down, train the site staff well, and do not affect the construction progress.

Note: In hot weather in summer, special attention should be paid to whether the engine of the lift truck is overheated.

Push around vertical mast lift 21 ft.-25 ft Features：
1. The mast is constructed of high-strength alumnum alloy material, which is durable. The interlocking system and high-strength plate chain with a safety factor of 10:1 are equipped with a steel wire safety protection system to enhance synchronization. The sturdy mast can ensure the safety of high-altitude operations.

2. With a unique six-wheel and its caster system, it can flexibly pass in corners, narrow areas and multi-obstacle working areas. 3. The control box includes low power indicator, lockable key switch, lift button and outrigger installation confirmation light.

4. The support feet are equipped with induction devices, and the machine cannot be started without any one leg installed in place.

5. The machine itself is equipped with a built-in backup power supply and manual valve to ensure that the lifter can descend normally in the event of a power failure. 6. The horizontal bubble meter can observe whether the lifting platform is in a horizontal position.

7. Support foot storage device, forklift handling slot on the base and lifting eye on the top of the mast, which is convenient for storage and transportation.

The multi-mast aluminum alloy hydraulic lift introduce：

The multi-mast aluminm alloy hydraulic lift is suitable for two-person and large-load operations, and the product has a wide range of applications. The series of products include double mast hydraulic lifts and four mast hydraulic lifts. The double mast hydraulic lift is safe and sturdy. The unique lifting design makes the transportation more convenient. It can be equipped with a special flip frame to facilitate entry and exit of narrow doorways and standard doorways. The two-person four-mast hydraulic lift has high-strength aluminum alloy masts, interlocking system, stable and reliable, four-mast lifting, and the maximum working height can reach 22 meters. The maximum load is 200kg.

Multi-mast hydraulic lifts are suitable for various industrial and commercial purposes, such as building installation, factory repair and maintenance, property management, exhibition construction, hotel equipment maintenance, cleaning, advertising installation and suspension, etc.

The multi-mast aluminum alloy hydraulic lift Features：
1. Lightweight design easy to pass through narrow doorways and standard doorways after flipping.

2. Extra strong mast system to increase stability

3. The control box includes low power indicator, lockable key switch, lift button and outrigger installation confirmation light.

4. The support feet are equipped with sensing devices, and the machine cannot be started if the support legs are not installed in place.

5. The machine itself is equipped with a built-in backup power supply and manual valve to ensure that the elevator can descend normally in the event of a power failure.

6. With a special flip rack, flip flexibly and reduce the storage height

7. Support foot storage device, forklift handling slot on the base and lifting eye on the top of the mast, which is convenient for storage and transportation.

After comparing the single-mast lift and the multi-mast lift,each has its own advantages and disadvantages. Each type of hydraulic lift has its own different value, depending on the site and use. We can also make a lift that suits you according to your needs.